The Diagnostic Box

Counter Top Transponder Key Tester A quick and affordable way for the Automotive Locksmith to obtain the NISSAN PIN CODE needed to program transponder keys and proximity keys. The TDB005 is a product that plugs into the OBD and a connector to plug in to a programmer such as a AD100 Pro, AD100, T-Code, Tcode Pro, Zedfull, SKP900, MVP Pro etc. When the programmer reads the BCM LABEL the TDB005 NISSAN PIN WIZARD will convert that number to the required PIN CODE. The PIN CODE will appear on the TDB005 NISSAN PIN WIZARD display. The TDB005 NISSAN PIN WIZARD will work on :- 4 digit pin with unlimited use. 20 digit pins 100 times. At the end of those 100 uses it will still work for the 4 digit pin but no longer for the 20 digit pin and a new unit will need to be purchased.

The TDB013 OBD Power Booster and Protector has been designed to protect your investement from being damaged by issues with the vehicle you are testing. Many vehicles can exhibit unknown problems and plugging in a piece of equipment worth thousands of pounds is sometimes a gamble. With jump packs, booster packs and car chargers the amount of interference, voltage spikes and voltage surges can easily damage expensive equipment. The TDB013 adds an additional level of insurance, and offers the protection you need. The TDB013 will take the damage rather than your expensive diagnostic equipment, and it wont leave you without your equipment for days and maybe even weeks while you get it repaired. An additional clever feature of the TDB013 is its ability to manage the supply voltage that is on Pin 16 of the OBD port. This varies depending on the vehicle, condition of the battery and the wiring from the battery to the OBD port. It is not uncommon to have only 11 volts at the OBD port when the battery is at 12 volts. The TDB013 will maintain 12 volts to your diagnostic equipment regardless whether the OBD port is at 10 volts or even 15 volts. It will maintain a fixed 12 volts DC to pin 16. This means it will smooth out any changes in voltage due to overcharging, boost packs or battery chargers which can cause havoc with anything connected to the vehicle. In additon if the battery level is a little on the low side, and the diagnostic equipment requires 12 volts to function, then have a fixed 12 volts even when the battery is at 10 volts can be a real plus when trying to diagnose a vehicle problem. The TDB013, a Diagnostic Machine Life Saver.....

Proximity and Smart Key Systems Tester The TDB003 Proximity/Smart Key Systems Tester offers a simple and cost effective way to diagnose and test problems relating to the vehicle immobiliser system, which is made up of a number of components. The TDB003 enables the transponder key, remote control operation, external vehicle antenna transmitters, internal vehicle antenna transmitters and transponder antenna to be fully tested to ensure that all parts of the system are working. The TDB003 can display signal levels, frequency measurements, signal waveforms and a number of other useful features.

Remote Control Tester The TDB001 Remote Control Tester has been designed to offer a quick and accurate way to test radio frequency (RF) remote controls and also infra red (IR) remote controls. The TDB001 offers a simple check that the remote is sending a signal, but more important that the frequency it is sending is correct. This is important for imported vehicles and systems, as there are a number of different frequencies used across the world. Other features include a rear magnet so the unit can be fixed inside a van for easy storage, or if your working on a vehicle or engine it can be fixed somewhere safe and not slip off. The TDB001 runs on 3 AA batteries, normal or rechargeable making it very cost effective, and will run for a minimum of 40 hours with batteries that are fully charged. An automatic power off also helps conserve battery life, and stops the unit from being left on. It also features a low battery indicator, to show when the batteries need recharging or replacing. A 3.5 numerical display, backlit makes the unit easy to use in all lighting conditions. Features :- + User friendly and portable + Powered by 3 x AA Batteries + Can be used on ALL Makes of vehicles + Test Radio Frequency Remote controls (RF) + Test Infra Red Remote Controls (IR) + Low cost Time saving tester + Simple to use + Low Battery Indication