Automotive Tools

5 Picks 20 diffrent Combinations Will Pick 8 and 10 Cut Ford Door and Trunk Locks

Ford Sure Shot by LTI The Best Locksmith Tool For Ford 10 Cut Something often found on Ford igni­tions is that a quick removal and replace­ment is often the best solution in terms of cost and time spent on the job. The Ford Sure Shot really shines when locksmiths are working on a vehicle that has already had an igni­tion replace­ment. Remov­ing the old igni­tion and insert­ing a new part makes the most finan­cial sense. The Ford Sure Shot lock­smith tool will start Ford 10-​​cut key vehi­cles, (1984 ½ –1996 cars, trucks and vans) with­out dam­age to the vehi­cle or its steer­ing col­umn. The LT-​​78 also allows you to change the steer­ing col­umn lock with­out steer­ing wheel or col­umn tear down. This makes a lot of jobs very quick and opens up an option that tech­ni­cians would not have with­out the Ford Sure Shot lock­smith tool. This locksmith tool will start most Ford 10 cut vehicles ( 85-96 Cars, Trucks and vans) without damage to the vehicle or the steering wheel and does not require column tear down.

Discover this innovative tool that simplifies and expedites the removal of ignition cylinders in a variety of vehicles, including the Ford F-150/250/350/550/650/750 and Bronco models made from 2015-2024. With compatibility spanning over 36 different vehicles, this tool streamlines the process with efficiency and ease.

Gator Face Cap Pliers The "Gator Tool" The original Face Capping Pliers Rarely in the Locksmithing industry does a new innovative tool get discovered. In the summer of 1998 in the back of locksmith van came one new and revolutionary tool. The tool came from many years of frustration and damaged automotive facecaps. The problem to the industry was removing automotive facecaps so repairs could be made to the inside of these locks, then reinstalling the same facecap back onto the repaired lock. This tool, the "Gator-Tool", will remove a facecap from the lock housing with very minimal damage and the same facecap can be reused after the repairs have been made to the lock. This sounds too good to be true, but it's not. The tool came from many years of doing facecap removal the old hard way with a screw driver, pliers, punch and a hammer. When most locksmiths start out they have limited funds to stock a large quantity of replacement facecaps. The result of this was trying to remove the facecap with a screw driver in good enough condition so the same facecap could be reinstall back on to the lock housing. Not only was money a consideration but also waiting time from a supplier. Plus when ordering, the minimum quantity was ten pieces. Most cars don't use ten facecaps on them. What do you with the extra eight facecaps? Some of these facecaps sit in the locksmiths inventory for many years. The first operation of the tool is to easily remove the original facecap in good condition so it can be replaced back on the lock. This is accomplished with a specially designed hardened tip and saddle. Once the repairs have been made, the second operation is reinstalling the same facecap back onto the lock housing. This tool is fully adjustable to accommodate most any size of facecap from the very thin and small to the larger, older models. The tool requires a minimum amount of adjusting to give a professional look after reinstallation of the facecap. The "Gator Tools, Face Cap Pliers - FCP42c" is a hearty tool with a durable finish to resist weather. The installed torsion spring helps open the tool, making the tool a breeze to use. The tip is made of specialty hardened material for long wear, but if broken it can be replaced without any hassles. Instructions are easy to follow with graphics to help anyone.

Gator Wafer Popper * Discontinued The ‘Wafer Popper Pliers’ by Gator Tools Co. Trying to improve the way you do Locksmithing. The ‘Wafer Popper’ came from needing three hands to remove stubborn or stuck wafers while removing and re-keying locks. Now just pop those problem wafers right out. No need for the old way now... no screwdriver damage, no more losing wafers. This tool works so well we fit a slogan to match the speed, “Click…Click…Click… It’s just that quick”. The tool can do the standard locks or the offset wafer equally as well. The handles are cushioned for comfort, torsion spring for one-handed use, and nickel plated for weather and durability Includes: x1 Wafer Popper Plier: *No longer includes an extra tip* (for replacement Gator Wafer Popper tips click here

General Motors 10 Cut B86 Space & Depth Keys Key Blank: B86, B89, B102, B91, B92, B93 - All of these us the same Space and Depth Info Made on a electronic code machine Code Series: S000A-S999K Spaces: 10 Depths: 1-4 Use these keys to originate keys by code

General Motors 2 Track Space & Depth Keys: High Security Space & Depth keys are used for generating sidewinder keys to a specific combination or by cutting by code. This simple process uses your existing sidewinder duplicating machine, instead of buying an expensive High Security Code Machine. Step by step instructions are included on how to use these keys. Specifications: Mfg : General Motors Key Blank: TP00OP-11.P1 Code Series: Z0001-Z6000 Spaces: 8 Depths: 4

General Motors B106 Space & Depth Keys Key Blank: B106 Made on a electronic code machine Code Series: G0001-G3631 Spaces: 10 Depths: 1-5 Use these keys to originate keys by code

Glassman Tool For Frameless Windows The Glassman wedge, designed for frameless window vehicles, is an essential accessory for any professional. Using built in LEXAN sheets around wedge shaped hard rubber, the Glassman creates a place to insert your long reach tool. Since it requires less space to insert into the tool, there is less chance that a window can explode. Spreading the pressure evenly over a wider area ensures less damage to the vehicle. Features: Designed for frameless window vehicles Lexan sheets Never damage a glass window again

GM 2 Track 10 Cut HS Space & Depth Key Set High Security Space & Depth keys are used for generating sidewinder keys to a specific combination or by cutting by code. This simple process uses your existing sidewinder duplicating machine, instead of buying an expensive High Security Code Machine. Step by step instructions are included on how to use these keys. Specifications: Mfg : General Motors Key Blank: TP00OP-11.P1 Code Series: V0001-V5574 Spaces: 10 Depths: 4

Gauges for Decoding GM Tumbler HPC's Quality Locksmith Tool Eliminating Guesswork This inexpensive set of gauges eliminates the guesswork when reading the tumblers on 6-cut single-sided GM keys. There is no need to take apart the lock plug or waste key blanks by "eye-balling" the depths. Simply press inward on the side bar and rake the tumblers, until the side bar moves inward to the unlocked position. Then, beginning with the longest gauge, place the gauge pin over each wafer until the shoulder stop butts against the top of the plug GM TUMBLER DECODER HPCGMTD-5

GM Ignition Removal Tool Set (4 Tools) - No Drilling, No Damage Contains all 4 different HU-100 IRT tools at a discounted price.

GM Ignition Removal Tool V1 - No Drilling, No Damage This tool was created to remove the ignition in the “OFF” position in GM vehicles using the HU100 keyway. Remove the ignition in the “OFF” position without damage, drilling, and do it in less than 90 seconds for super-fast key origination’s or excellent for jammed ignitions that will no longer turn to the “ON” position. (patent pending) CURRENT MODELS INCLUDE: 2010+ Chevrolet Camaro 2011+ Chevrolet Cruze 2010+ GMC Equniox 2010+ GMC Terrain 2010+ Buick Allure 2010+ Buick Regal 2012+ Chevrolet Orlando 2012+ Buick Verano 2012+ Chevrolet Sonic. GMZ (B106) keyway models 2008+ Buick Enclave 2008+ Chevrolet Traverse 2008+ GMC Acadia 2007+ Saturn Outlook.

This tool was created to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece. It will remove the ignition in the “OFF” position without damage, drilling, and do it in less than 60 seconds for super-fast key origination’s. Excellent for jammed ignitions that will no longer turn to the “ON” position. (patent pending) CURRENT MODELS INCLUDE: Chevrolet Silverado 2014+ GMC Sierra 2014+ Chevrolet Express Van 2015+ GMC Yukon 2015+ Chevrolet Suburban 2015+ GMC Savana 2015+ Chevrolet Tahoe 2015+ Cadillac Escalade 2015+

This tool was created to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece. It will remove the ignition in the “OFF” position without damage, drilling, and can do it in less than 60 seconds for super-fast key origination’s. Excellent for jammed ignitions that will no longer turn to the “ON” position. (patent pending) CURRENT MODELS INCLUDE: Chevrolet Colorado 2015+ GMC Canyon 2015+

This tool was created to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece. It will remove the ignition in the “OFF” position without damage, drilling, and can do it in less than 60 seconds for super-fast key origination’s. Excellent for jammed ignitions that will no longer turn to the “ON” position. (patent pending) CURRENT MODELS INCLUDE: Chevrolet Cruze 2017+

GM Rocker Lock Pick Set Set consists of 12 Double ended, single sided rocker picks. Can create 24 combinations covering the 1000 plus possible key cut configurations for GM side bar locks. Will work on GM steering column, trunk and door locks. Not for use with 10-cut ignitions or ignition systems equipped with PassKey. The unpickable GM 6 cut is now pickable

Comprehensive 14-Piece Kit: The Grand Master Lockout Kit features a versatile collection of 14 tools, including essentials like the S-Hook and Slim Jim, as well as specialized tools like the Gas Cap Pick and Chrysler Tool, equipping you with the right tool for virtually any lockout situation. Enhanced with New Specialty Tools: Keep up with the latest in lockout technology. The Grand Master Kit now includes new specialty tools to expand its range and tackle the evolving demands of the automotive industry. Fully Illustrated Instruction Manual: Confidently handle any lockout scenario with the kit’s fully illustrated instruction manual. Clear, step-by-step guidance ensures effective tool use for efficient, damage-free car openings. Durable Vinyl Carrying Case: The kit is neatly packed in a heavy-duty vinyl carrying case, providing easy portability and keeping your tools secure and ready for action. Bonus Fast Access Car Opening Set: The kit also includes the Fast Access Car Opening Set, featuring essential tools like the Flexible Long Reach Tool, Air Jack Air Wedge, One Hand Jack Tool, and Strip Tool. This bonus set enables quick, simple, and damage-free vehicle openings—an indispensable asset for automotive professionals.

Grand Master Lock Pick Set Ultimate pick set contains 35 picks. Includes Model No.`s: 280- GM Rocker Pick Set 290- FRP Forgein Rocker Pick Set 300- F Rocker Ford Pick Set 310- C Rocker Pick Set ( Chrysler, Plymouth, Dodge) 320- J Lock Pick Set (Japanese, & other Foreign Vehicles) 330-tension wrench 106-gas cap pick tool. Custom leatherette case.

Honda 4 Track Space & Depth Keys High Security Space & Depth keys are used for generating sidewinder keys to a specific combination or by cutting by code. This simple process uses your existing sidewinder duplicating machine, instead of buying an expensive High Security Code Machine. Step by step instructions are included on how to use these keys. Specifications: Mfg : Honda Key Blank : HO01 Code Series: M,J,K,L000-999 Spaces: 6 Depths: 6

Honda and Acura Ignition Roll Pin Refill Pack (10pk) This pack will include 10 clamp tube sets for our Honda/Acura Ignition Roll Pin

Honda and Acura Ignition Roll Pin Removal Tool Because of the increasing frequency of these ignitions failing this kit was made to allow the locksmith to remove the ignition roll pin on most Honda and Acura models without drilling or causing damage. Our kit is unique in that it grabs the outside of the roll pin compressing its diameter allowing the roll pin to be easily removed and reused after the ignition repair has been completed.

Honda HD103 Space & Depth Keys Key Blank: HD103 Made on a electronic code machine Code Series: 5001-8442 Spaces: 8 Depths: 1-6 Use these keys to originate keys by code

HPC Auto Sleeve HPC's AutoSleeve helps prevent damage to weather stripping and automobile finish. This hardened plastic interlocking envelope is ideal for separating weather stripping from door frames or windows without damage. Once in place, the AutoSleeve gives you a protective tunnel to insert your car opening tool without worry of scratching or damaging your customer's car. Show your customers that you care enough about their vehicle not to scratch it

The 2000 Series Extractor Set is the ultimate in broken key and pick removal. The tools are designed to slide next to broken keys along the side mill and ride along the bottom pins to hook into a cut in the key. The tools are made of high grade stainless steel and can be bent to reach around many obstacles. This 4-piece set makes all other extractors obsolete. Shirt Pocket Size (Closed): 1-3/4" x 5-5/8" (4.5 x 14.5cm) Genuine Leather Case with Snap Contains 4 Extractors Stainless Steel Blades and Handles

Retrieving broken keys and foreign objects from locks is a regular part of your business. HPC produces a wide range of the finest extractors on the market. These individual extractors provide a variety of options to suit most preferences. Spring steel without foam handle (.022 inch thick)

HPC Interchangeable Key Extractor Set The Interchangeable Extractor Set is the most popular extractor set on the market. Its compact size allows you to carry a variety of extractors inside this tiny set. It includes 4 extractor blades stored inside a hollow handle: 1 saw blade; 2 spiral blades (.040" / 1mm diameter) and 1 spiral blade (.050" / 1.27mm diameter). Shirt Pocket Size (Closed): 1/4" x 3-1/2" (0.65 x 9cm) Contains 4 Interchangeable Extractor Blades Stainless Steel Components

HPC Original Air Wedge HPC's Air Wedge (AW-99) slides between the vehicle door and the weather stripping on the door frame. Then the pump is squeezed, inflating the Air Wedge and separating the vehicle door from the frame. This provides more than ample room to insert a car opening tool. The Air Wedge is made of a sturdy vinyl and equipped with a release valve.

HPC Power Wedge Tool (PW-100) The HPC Power Wedge is a revolutionary auto entry device designed to aid in opening even the most difficult vehicles! The Power Wedge is a spring loaded compound lever that safely spreads a vehicle door away from the body, allowing for the easy entry of a "Through the Car" opening tool POWER WEDGE TOOL HPCPW-100

Retrieving broken keys and foreign objects from locks is a regular part of your business. HPC produces a wide range of the finest extractors on the market. These individual extractors provide a variety of options to suit most preferences. Stainless steel blade with brass handle (.022 inch thick)

HPC Spiral Broken Key Extractor (EZ-5) Stainless steel blade with brass handle .040 inch thick Made in the USA

HPC Stainless Steel Decline Double Barb Extractor Strong and flexible stainless steel blade, with stainless steel handle. Retrieving broken keys and foreign objects from locks is a regular part of your business. HPC produces a wide range of the finest extractors on the market.

HPC Stainless Steel Decline Single Barb Extractor Strong and flexible stainless steel blade, with stainless steel handle. Retrieving broken keys and foreign objects from locks is a regular part of your business. HPC produces a wide range of the finest extractors on the market.

HPC Stainless Steel Incline Double Barb Extractor Strong and flexible stainless steel blade, with stainless steel handle. Retrieving broken keys and foreign objects from locks is a regular part of your business. HPC produces a wide range of the finest extractors on the market.

HPC Stainless Steel Incline Single Barb Extractor Strong and flexible stainless steel blade, with stainless steel handle. Retrieving broken keys and foreign objects from locks is a regular part of your business. HPC produces a wide range of the finest extractors on the market.

HPC Universal Auto Air Wedge Tool The new Universal Air Wedge is four tools in one! It opens cars, installs doors and windows, holds doors, and opens garage doors. Like the Original Air Wedge¨, the Universal Air Wedge is made of a sturdy vinyl and equipped with a bulb pump and release valve for quick and easy inflating and deflating UNIVERSAL AUTO AIR WEDGE TOOL HPCAW-100