on all orders over $150*
on all orders over $150*
Visit CLKsupplies and grab the Flip it by HPC part number Fit-2. It is a fancy-looking plug spinner but simple to use.
You'll notice these two little metal dolls sticking up. One is fixed on its head, and then the other is specified on the turn piece.
HOW IT WORKS
The knob can spin around, and the pin can move back and forth. Please get to the centerline of the plug spinner, right where that pin is, depending on which way I'd want to flip this cylinder. You always need to twist the knob the opposite way you want it to go. In this case, we want it to go from right to left or clockwise.
Twist the knob using the opposite way you want the cylinder to flip, and when you see that the pins will come close to each other, push it to lock it down. A hole allotted for the other pin will lock it and make the push button stick out.
Once it is set, push the button. In the same way, you can flip it around to the other side.
DEMONSTRATION
Since I want the plug to go from right to left, find the centerline, turn and left to right, then push it in to lock it.
The most crucial part is that you don't forget where that center line is. Many guys want to start looking at it and put it in at different angles, or they're flipping around. At this point, we're going to get it put in, get it pretty close to the shear line right up and down where the bible is sticking on the inside of the lock.
Push the button, and it's going to flip the cylinder over. Here we go.
Once again, the Fit-2 plug spinner by HPC. Thanks, and we'll see you next time!
