Door Wrap Plates: The Fast Fix for a Damaged Door Around the Lock
A kicked-in door, a lock that’s been swapped five times, or an edge that’s splitting around the latch. You can sell a new door, or you can fix the one that’s there in about 15 minutes with a door wrap plate. A lot of customers will take the second option.
What a Door Wrap Plate Does
A wrap plate (also called a wrap-around plate or edge guard) is a formed metal plate. It wraps both faces of the door plus the edge at the lock area. It covers the damage, stiffens the weakened section, and gives the lockset a solid surface to mount against.
How to Size One: Measure These Four Things
Get these right and the plate fits the first time:
- Door thickness. It’s usually 1-3/4” for exterior and commercial doors and 1-3/8” for many interior doors.
- Bore size. Standard bored locks use a 2-1/8” cross bore.
- Backset. It’s usually 2-3/8” or 2-3/4”.
- How many holes. Is it a single lock, or a knob plus a deadbolt?
Get those four right and picking the plate is the easy part.
Which CLK Wrap Plate Fits the Job
All of these are stainless steel (32D):
- 1-3/4” door, 2-3/4” backset, single bore: Door Wrap 2-1/8” Bore for 1-3/4” doors
- 1-3/8” door, 2-3/8” backset (typical interior): Door Wrap 2-1/8” Bore, 4” x 4-1/2” x 1-3/8”
- More coverage for knobs or deadbolts (1-3/4”, 2-3/4” backset): 9” Door Wrap for 1-3/4” doors
- Knob plus deadbolt (two 2-1/8” bores, 6” apart): Double-Bore Door Wrap, 4-1/4” x 12”
- Damage where you’ll cut your own prep: Blank Door Wrap 4-1/4” x 9” x 1-3/4”
If the strike side took a beating too, a Standard ANSI Strike Plate is worth having on hand for commercial metal frames.
Install Tips
- Pull the lockset and clean up any loose splinters or bent metal first. The plate needs to sit flat.
- On an over-bored or split door, the wrap does the structural work. Don’t skip the screws.
- Reinstall the lockset through the plate and check the latch alignment before you leave.
Cutting your own prep in a blank wrap? You’ll want a clean 2-1/8” cross bore at the right backset, so take your time on layout before you drill.
FAQ
What size door wrap do I need? Match the door thickness, the bore (usually 2-1/8”), the backset, and the number of holes.
Can a wrap plate fix a kicked-in door? Often, yes, when the damage is around the lock area and the rest of the door is sound. If the frame or hinges are damaged, they need their own repair.
What’s the difference between a shorter wrap and a 9” wrap? The 9” covers more of the door face and edge, which is useful for bigger damage or knob-and-deadbolt setups.
Shop all sizes in Door Wraps & Accessories.